Those "security-level" commands that you issued for the interface took care of that. On your first point, the firewall portion is already setup. No threat-detection statistics tcp-intercept Snmp-server enable traps snmp authentication linkup linkdown coldstartĬrypto ipsec security-association lifetime seconds 28800Ĭrypto ipsec security-association lifetime kilobytes 4608000ĭhcpd address 192.168.2.2-192.168.2.33 insideĭhcpd auto_config outside interface insideĭhcpd dns 192.168.1.120 interface outside
![cisco asa 5505 configuration example cisco asa 5505 configuration example](https://i.ytimg.com/vi/zF2EF_idMyQ/maxresdefault.jpg)
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absoluteĭynamic-access-policy-record DfltAccessPolicy Icmp unreachable rate-limit 1 burst-size 1 Result of the command: "show running-config" : Saved So the outside interface just goes to the office network. Right now it is just setup on my work machine for some testing. I could also RDP to the DC on the inside interface then connect if that was more secure. Setup access to the appliance from our main office and my offsite lab. Are there any other configs I should be aware of to secure the actually firewall or does it come setup pretty well out of the box? I feel if I saw one example like for port 80 I could replicate that.
![cisco asa 5505 configuration example cisco asa 5505 configuration example](https://www.expertnetworkconsultant.com/wp-content/uploads/2018/11/how-to-configure-cisco-asa-5506-x-for-internet-1024x659.png)
We also need RDP opened to both machines we use a non-standard port. The other is the DC so all standard ports for that need to be opened up. There will be two servers attached to the inside interface: one is a web server so ports 80, 25, etc. I need some step by step for the following tasks
#Cisco asa 5505 configuration example how to
I know how to get it functioning with an inside and outside interface so that's great! I am looking for some straight forward step by step instructions to complete the following tasks. If these examples don't fit your scenario post your specifics and we can customize a config for you.I have looked through a lot of these posts on the Cisco ASA5505 as well as gone online. Valid for all ASA OS versions class-map inspection_default Object-group service svcgrp-10.0.0.10 tcpĪccess-list outside_access_in extended permit tcp any object hst-10.0.0.10 object-group svcgrp-10.0.0.10-tcpĪccess-group outside_access_in in interface outsideĪSA 8.2 and prior access-list outside_access_in extended permit tcp any interface outside eq 1723 Nat (inside,outside) static interface service tcp 1723 1723 Static PAT (port forwarding) TCP/1723 using ASA outside interface IPĪSA 8.3 and newer (with focus on objects) object network hst-10.0.0.10ĭescription Server TCP/1723 Static PAT Object.Explicit ACL permit for GRE is not necessary.ACL permit TCP/1723 to server/IP (whether real, mapped, or interface depends on ASA version).Configure necessary NAT/PAT if using NAT/PAT (Optional but usually required).
![cisco asa 5505 configuration example cisco asa 5505 configuration example](http://www.furorteutonicus.eu/wp-content/uploads/2012/03/contents.jpg)
There are at most three things required to get PPTP working through an ASA Cisco TAC likely gets a handful of cases related to this. The stock ASA configuration does not include support for PPTP passthrough by default - crazy as to why.